SHARPENING THE BLADE
For best mowing performance, the mower blade must be kept sharp. A dull blade does not cut
grass evenly and overloads the motor. Under normal circumstances, sharpening the blade twice
during the mowing season is usually sufficient. However, if your lawn has sandy soil, more
frequent sharpenings may be required.
• Following the instructions in the Replacing the Cutting Blade section, remove the mower blade.
DO NOT attempt to sharpen the blade while it is attached to the mower.
19
MAINTENANCE
REPLACING WHEELS
To replace a wheel:
• Disconnect the mower from the power supply.
• Turn the mower on its side.
• Using a flat blade screwdriver, pry off the hubcap.
• Remove the wheel,replace with new wheel .
• Replace hubcap.
When removing, inspect the blade carefully. If blade is bent or damaged, replace immediately
with a new blade. Failure to replace a bent or damaged blade could cause an accident resulting
in possible serious injury
WARNING
SHAFT
WHEEL
CAP OF SHAFT
To Next Page