SPECIFIC SAFETY RULES
6
• Thoroughly inspect the mower for any damage.
• Repair any damage before restarting and continuing to operate the mower.
■ Stop themotor, disconnect the power cord, and wait until the blade comes to a complete stop
before removing the grass catcher or unclogging the chute. The cutting blade continues to rotate
for a few seconds after the motor is shut off. Never place any part of the body in the blade area
until yo u are sure the blade has stopped rotating.
■ Disconnect the plug from power source before maing any adjustments, changing accessories, or
storing the lawn mower. Such preventive safety measures reduce the risk of starting the product
accidentally.
■
If the mower should start to vibrate abnormally , stop the motor and check immediately for the cause.
Vibration is motor and check immediately for the cause. Vibration is generally a warning of trouble.
■
Service on the product must be performed by qualified repair personnel only . Service or maintenance
performed by unqualified personnel could result in inj ury to the user or damage to the product.
■ Use only identical replacement parts when servicing the product. Use of unauthorized parts may
create a risk of serious inj ury to the user, or damage to the product.
■ If the power supply cord is damaged, it must be replaced only by the manufacturer or by an
authorized service center to avoid risk.
■ Save these instructions. Refer to them frequently and use them to instruct others who may use
this product. If yo u loan someone this tool, loan them these instructions also.
To Next Page
Loading...
