Lawson Hammock BLUE RIDGE CAMPING HAMMOCK User Manual

!!!!!!!Lawson! Hammock!
!!!!!!!!! BLUE RIDGE CAMPING H A MM OC K !
!!!!!!!!!!!!!!! These parts are inside your stuff sack, ready to assemble:!
!
!
!
!
H A M M O C K W / C O L L A P S E D S P R E A D E R B A R S
!
!
!
!
A R C H P O L E S R A I N F L Y / T A R P
!
!!!!!
1!!!!!!At each end of the unrolled hammock, join spreader bar halves.!
Make sure ropes are not tangled or twisted. Check all knots on ropes
attached to hammock bed for tightness. Ropes may stretch with use,
requiring occasional re-tightening.!
!
!
!
B
!
!
!
!
!
T Y I N G A B O W L I N E
!
!
!
!
!
A
!
!
!
2 Hang hammock between two trees or sturdy upright objects using
!
Tree Huggers (sold on our website), other straps or rope/webbing
as shown. Attach hanging rope at hammock end loop with a
bowline or other strong knot, and wrap rope at least once around
tree before re- attaching to hammock end loop with another
bowline (see detail above). NOTE: Tie 3–4’ off ground, keeping
rope & hammock taut.
!
3
!!
Once hammock is hung, fit together the two shock-corded aluminum
arch poles and slide one through each sleeve on top of hammock.
Insert end of each pole through grommet as shown (detail A). Attach
snap hooks on elastic cords at ends of hammock to tops of arch
poles (detail B). Shorten elastic if necessary to keep canopy tight.!
!
!
!
!
!
A
!
!
!
!
!
B
W R A P
U N D E R
R O P E S
& C L I P
BIVY SETUP: Follow above instructions, but do not hang (#2). Instead, use
stakes to stretch & secure both ends of hammock to ground as shown.
Continue with steps #3–4.
!
!
4!!!!
To use rainfly, extend over hammock, attaching hooks at each end
to hammock end loops (detail A). Attach snap hooks at rainfly
corners to adjacent hammock ropes (B). Fit elastic loops on rainfly
sides around bottoms of arch poles (C). Attach Velcro® tabs on
rainfly sides to Velcro® tabs on hammock bottom. Rainfly will
appear loose when hammock is empty. If tightening is necessary,
attach snap hooks from B farther in on hammock ropes, or knot
elastic cord from A.!
!
!
!
!
!
!
!
!
SEE REVERSE FOR NOTES & CARE

Lawson Hammock BLUE RIDGE CAMPING HAMMOCK Specifications

General

Brand	Lawson Hammock
Model	BLUE RIDGE CAMPING HAMMOCK
Category	Hammocks
Language	English

Summary

Blue Ridge Camping Hammock Assembly

Hammock Components Identification

Identifies hammock, spreader bars, arch poles, and rainfly included in the stuff sack.

Step 1: Spreader Bar Connection

Join spreader bar halves at each end of the hammock, ensuring ropes are not tangled or twisted.

Step 2: Hanging the Hammock

Hang hammock between trees using ropes, securing with bowline knots, 3-4 feet off the ground.

Step 3: Arch Pole & Canopy Attachment

Fit arch poles through sleeves and attach snap hooks to canopy elastic cords for tension.

Step 4: Rainfly Attachment

Attach rainfly hooks to hammock loops and corners, and elastic loops to arch poles.

Bivy Setup Method

Use stakes to secure hammock ends to the ground for bivy setup, omitting hanging step #2.

Hammock Usage, Care, and Warranty

Usage Tips and Precautions

Provides tips on entering, weight limits, child supervision, fire safety, and temperature use.

Care and Maintenance Guide

Covers seam sealing, storage, cleaning, zipper maintenance, and repair for longevity.

Limited Warranty Policy

Details the one-year warranty, return policy, exclusions, and contact information.