Do you have a question about the LAZBOY Rejoice and is the answer not in the manual?
Guidelines for supervising children and managing water temperature limits.
Covers pump operation, cover use, medical consultation, and entry/exit safety.
Warns against using alcohol, drugs, or medication before/during spa use.
Explains the causes, symptoms, and effects of hyperthermia.
Covers 10-year structural and 5-year acrylic finish guarantees.
Details 3-year guarantees for electronic controls, pumps, heater, lighting, etc.
Covers 1-year guarantees for AquaCoustics, AquaVision, covers, and jets.
Information on transferring the remaining portion of the guarantee to a new owner.
Important considerations for choosing a spa location and site preparation.
Requirements for foundation support, ventilation, and service access clearance.
Ensuring proper access to water, drainage, and electricity for installation.
Dimensions for conduit entry points for different spa models.
Specifications for the Rejoice model: Volts, Freq., Phase, Rating, GFCI, wire size.
Specifications for Revive, Relieve, Refresh models: Volts, Freq., Phase, Rating, GFCI, wire size.
Illustrates correct and incorrect GFCI breaker box wiring for proper function.
Provides a visual guide for wiring the spa in the U.S. and Canada.
Steps to take before adding water, including valve and union checks.
Instructions for properly filling the spa with water, including filter area filling.
Procedures for checking spa operation, including GFCI test and jet activation.
Ensuring pumps are primed, checking water flow, and understanding heating rates.
Explains total alkalinity and its importance for water balance.
Details the procedure for testing and adjusting pH levels to 7.2-7.8.
Describes how to test and maintain water hardness levels between 200-400 ppm.
Guidance on maintaining chlorine or bromine levels between 3-5 ppm for sanitation.
How to display and change the spa's water temperature from 80°F to 104°F.
Instructions for operating Pump 1, including low/high speeds and auto shutoff.
Instructions for operating Pump 2, including low/high speeds and auto shutoff.
How to operate the spa light, change colors, and select operating modes.
Information on connecting MP3 players via TRS connector to the dock.
Information on positioning the optional garden speakers for optimal sound.
Details on the cover's lock-down tabs, material, insulation, and handles.
Common pH fluctuations after chemical additions and party events.
How to clean mildew from the spa cover.
Causes of foamy water from soap/detergent residue and how to resolve it.
Troubleshooting discolored water due to heavy metals or pH/alkalinity.
Explanation of continuous circulation pump operation for filtration.
Guidance on contacting dealers for service and guarantee registration.
Information on jet removability, interchangeability, and adjustment.
Recommendations for draining and refilling the spa frequency.
Step-by-step guide to bleed trapped air from the spa system.
Using non-sudsing cleaners and specific products for spa and filter cleaning.
Solutions for problems related to circuit breakers and wiring.
Troubleshooting chlorine levels, circulation pump, and foamy water.
Resolving problems with spa lights and leaks.
Addressing low jet pressure and no water flow issues.
Interpreting display messages like 'OH' and 'SA', 'SB'.
Understanding messages related to sensor balance, HL, and LF errors.
Interpreting diagnostic messages for water issues and potential freezing.
Instructions for cleaning the spa's Everlast cabinet.
Guidelines for maintaining the color coordinated spa cover.
Cleaning and maintaining the active comfort massage jets.
Cleaning the LED Mood and Safety Light lens and acrylic surface.
Procedure for operating the drain valve and connecting a hose.
Steps for refilling the spa through the filtration canister.
Recommended cleaning and replacement schedule for spa filters.
Guidelines for changing spa water and wiping down surfaces.
Procedure for preparing the spa for periods of non-use, especially in cold weather.