35
For HELP, call La-Z-Boy
® Spas at 1.800.465.2933.
How do I bleed air from my system?
When draining and refilling your spa / hot tub, the pump may become air locked. Air
-locked pumps stop water from flowing in your spa / hot tub and is easily resolved by
bleeding off the trapped air. To do this:
Turn off or unplug the GFCI breaker
Open the access panel below the topside control panel
Loosen the union on the front of the pump until you hear the trapped air escape
Once water drips out in a continuous stream, hand tighten the union until the water
stops leaking
Loosen the discharge union on the top of the pump until you hear the trapped air
escape or water drips out in a continuous stream
Turn on pump to make sure that there are no leaks
Put the access panels back on
Figure 15 - Bleeding Air
How should I clean my spa?
Use non-sudsing cleaners and non-oily polishes. A high quality all purpose cleaner
quickly removes scum lines and helps restore your shell’s original beauty. Rinse all
filters, covers, and surfaces thoroughly with warm tap water. A high quality filter clean-
er is a safe, effective way to clean and re-use your filters and a plumbing cleaner
cleans the inside of all plumbing in your spa / hot tub. You can contact your local La-Z-
Boy Spa dealer to order these easy-to-use cleaning products.
To Next Page
Loading...
