LAZER LED - Remove and Re-install the LED; Urbanize, Lizard, Gekko, LilGekko Installation; Urbanize, Lizard, Gekko, LilGekko Removal

2. Remove and re-install the LED
2
LED
1) To install in the helmet, simply align
the LED light with the rear hole. First
push the top in and then the bottom as
shown in diagram 1A.
2) To remove the LED, reach into
the helmet, push the head basket
away slightly and push the light out
of the back of the helmet as shown in
diagram 2A.
1A)
2A)
1A) 2A)
Lazer Urbanize
Lazer Lizard, Gekko + Lil’Gekko