LAZER LED - Remove and Re-install the LED for Cameleon; Cameleon Installation; Cameleon Removal

3. Remove and re-install the LED
1) To install in the helmet, simply align
the LED light with the rear hole. First
push one side in and then the other
side as shown in diagram 1A.
2) To remove the LED, reach into
the helmet, push the head basket
away slightly and push the light out
of the back of the helmet as shown in
diagram 2A.
1A) 2A)
3
LED
Lazer Cameleon
Enjoy riding
safely!