lb pa Series - PA-S 250;2100;2200

13
Technical Data
PA-S 250 / PA-S 2100 / PA-S 2200
Inputs ..................................................................... 2 × Line In sym. + 2 × Line In Cinch
Nom. input level ................................................... + 4/-6 dBU, switchable
Max. input level ................................................... + 20 dBU
Input impedance .................................................... 20 kOhms
Load impedance .................................................... ≥ 2 Ohms
Outputs ................................................................. 2 × Speaker Out up to 2 × 2,5 mm², (screwtype terminals, pluggable)
Output power PA-S 250 / PA-S 2100 / PA-S 2200
2 Ohms .................................................................. 2 × 50 / 100 / 200 Watts
4 Ohms .................................................................. 2 × 50 / 100 / 200 Watts
8 Ohms .................................................................. 2 × 30 / 60 / 120 Watts
Frequency range ................................................... 15 Hz – 22 kHz
Dynamic range ...................................................... > 100 dB
Display .................................................................. LEDs for ON/STANDBY; LEDs per channel for PROTECT, LIMIT, SIGNAL, SLEEP
Controls ................................................................ Power switch at front. At back VOLUME control per channel, DIP switches for
AUTO ON/STEADY ON, GROUND/LIFT and SENSITIVITY +4/-6 dBU
Additional connectors .......................................... VCA inputs 0 -10 V for each channel (also for DV modules), ON/OFF contact N/C
Cooling ................................................................. PA-S 250: fanless, PA-S 2100 / PA-S 2200: Regulated fan,
Airflow from front to back
Protective circuits ................................................. Peak limiter, current limiter and power limiter for each speaker output,
short circuit and multilevel overtemperature protection
Power supply ........................................................ 90 up to 260 VAC
Main connector ..................................................... IEC connector
Power consumption PA-S 250 / PA-S 2100 / PA-S 2200
Standby ................................................................. < 0,5 Watts
All channels SLEEP ............................................... 2,7 / 3,3 / 3,7 Watts
All channels active ............................................... 4,4 / 7,4 / 8,4 Watts
1/8 Nominal power ............................................... 20 / 38 / 75 Watts
Max. average consumption .................................. 42 / 80 / 152 Watts
Peak power ........................................................... 125 / 240 / 480 Watts
Dimensions (W × H × D) ........................................ ¼ 19“, 1 U, 110 × 42 × 233 mm
Weight .................................................................. 1,3 kg
Warranty ............................................................... 5 years