6. Wall Mounng
Eng-5
1. Open the package and take out the product with foam sll aached. Gently
place it on a desktop or table. Remove the extra parts and the foam covering
the monitor. If the monitor is already aached to the stand, remove the stand.
2.
3.
back of monitor. Follow the below picture to ghten the included four screws
Genger into the hole of adapter then pull to remove it from the
onto the mounng holes on back of monitor.
Install the monitor on the wall, mounxture as desired.
Screws x 4
Mount
(Not included)
To Next Page
Loading...
Need help?
General