LDL TECHNOLOGY Tire Watch User Manual

LDL TECHNOLOGY COPYRIGHTS www.aimshop.com 1 /8
DISPLAY USER MANUAL
TIRE WATCH
TM
RACING
Thank you for buying our tire pressure and temperature monitoring system. With TIRE WATCH you will improve
your performances by optimizing your pressure values and you will get more precise.
A – GENERAL FEATURES
The system consists of 4 to 32 sensors (transmitter), a display (receiver) and a remote control unit (LF Trigger)
which allows you to activate the RF transmission when the vehicle is at stop. To help you inflate your tire, the
display also keeps in memory the maximal pressure and the maximal temperature that every tire achieved during
the race or the session.
Tire Watch Sport enables you to pre-equip up to 32 wheel rims. You can then change your wheels at any time of
the race while keeping the information of pressures and temperatures of the 4 wheels on the vehicle. The display
recognizes “automatically” (after an initial phase of learning) the wheel which was changed.
1 – SYNOPTIC
The sensors constantly measure tire pressure and
temperature and send the informations every seconds
thanks to the Radio Frequency Technology.
The display decods and shows in real time the
measured values. The driver is alerted by a light
indicator (led is blinking) and can react before
the tire may place his safety at risk.
Rear left
Rear right
Front right
Front left

LDL TECHNOLOGY Tire Watch Specifications

General

Brand	LDL TECHNOLOGY
Model	Tire Watch
Category	Monitor
Language	English

Summary

GENERAL FEATURES

Synoptic Overview

Details the system's sensors, display, and remote control unit for tire monitoring.

SET UP YOUR DISPLAY AND MAIN FUNCTION

Display Button Functions

Explains the function of the display's buttons (Bt1, Bt2) for navigation and settings.

Display Power Management

Details how to power the display on using short pushes and turn it off via long push or auto-off.

Switch Display Modes

Describes how to switch between pressure and temperature displays using button presses.

SET YOUR VALUES

View Maximum Measured Values

Shows how to view the maximum recorded pressure and temperature values for each tire.

SET UP YOUR VALUES – UNROLLING MENUS

Set Pressure and Temperature Units

Allows selection between Bar/Psi for pressure and °C/°F for temperature units.

Configure Display Sequence Timing

Configures the display sequence timing for pressure and temperature readings.

Set Front Tire High Pressure Alert

Sets the maximum allowed pressure alert threshold for front tires.

Set Rear Tire High Pressure Alert

Sets the maximum allowed pressure alert threshold for rear tires.

Set Low Pressure Alert for All Tires

Sets the minimum allowed pressure alert threshold for all wheels.

Set High Temperature Alert for All Tires

Sets the maximum allowed temperature alert threshold for all wheels.

LF TRIGGER LEARNING PROCEDURE

Initiate Sensor ID Learning

Guides on starting the sensor ID learning process via the display and LF Trigger.

Validate or Cancel Sensor ID

Explains how to confirm or reject learned sensor IDs, including navigating Yes/No options.

Assign Wheel Position and Set Number

Details assigning learned sensors to specific wheel positions and set numbers.