LDS IGBT-K100 User Manual

IGBT
SERIES
COMPACT INVERTER
1PHASE INVERTER
WITH 150% OVERLOAD PROTECTION
MODEL NO
IGBT - K100 IGBT - K200
Motor Rating (maximum)
25W ~ 120W (1/6HP) 25W ~ 200W (1/4 HP)
Rated Output Capacity
0.4kVA 0.6kVA
Rated Output Current
1 Amp 1.5 Amp
Rated Output Voltage
AC 3 Phase 220V (3Ø220V)
Range of Output Frequency
0.1Hz ~ 400Hz
Power Source Voltage
AC 1 Phase 200V~240V (1Ø), 50Hz/60Hz
Input Current
2 Amp 3 Amp
Permissible AC Power Source Fluctuation
200V ~ 240V, 50Hz/60Hz, ±5%
Overload Protection
150% of rated output current for 1 minute
Cooling Method
Self-cooling
Protection Level
IP20
Dimension
Body 52 x 127 x 60mm • Mounting Frame: 60
x 100 x 3mm
Weight
0.4KG
Options
With Braking Transistor / Without Braking Transistor
Remark
Product dimension and mounting compatible with
US Type Speed Controller (US61-US62 / US71-US72)
The compact IGBT inverter is especially advantageous for standard application by
virtue of its user friendliness. It offers simple and safe operability, energy saving,
compact design as well as superior performance. The inverter is use in numerous
application such as conveyor drives, feeders, machining tool and door drives. It is
compactible with Unit Type AC Speed Controller (US series).
OPERATION PANEL
Start
Stop
• Reset
Up
• Down
Enter or Exit
the Function Mode
Set
• Switch
Monitor Mode
Switch Function
•
Group
• Number
Special Function
Key
Status Display I
Indicator : Frequency • Voltage •
Current • Operation
Status Display II
Power Indicator •
SPEC • START Key Indicator
Main LED Display (high brightness)
Display of Setting & Error Code
Potentiometer / Knob
Fast Setting and Input
Function Key
RUN
STOP
RESET


PROG
FUNC
DATA
<<
SPEC
P 1

LDS IGBT-K100 Specifications

General

Brand	LDS
Model	IGBT-K100
Category	Inverter
Language	English

Summary

Inverter Specifications

General Specifications

Safety Precautions

General Safety Guidelines

Essential safety measures to prevent electric shock, damage, and ensure safe operation of the inverter.

Installation Cautions

Pre-Installation Verification

Instructions for verifying the product's appearance, manual, and model number upon receipt.

Installation Guidelines

Control & Operation Features

General Control Characteristics

Comprehensive overview of control methods, frequency settings, braking, V/F patterns, and other functions.

Operation Panel Functionality

Panel Button Descriptions

Explanation of individual buttons on the operation panel and their functions like PROG, RUN, STOP/RESET.

Parameter Group Overview

Simple Parameter Group

Overview of the simple parameter group (F0.18 = 0) for basic configuration settings.

Complete Parameter Group

Overview of the complete parameter group (F0.18 = 1) for advanced and comprehensive configuration.

System Parameters (F0)

Parameter Lock & Defaults

Configuration of parameter lock status and default factory or saved settings.

Operation Parameters (F1) - Start Command

Start Command Selection

Options for selecting the start command source, including operation panel, terminals, and communication.

Operation Parameters (F1) - Frequency/Display

Frequency & Analog Input

Settings for primary frequency command source and analog input selection options.

Display & Speed Settings

Options for main display content, machine speed ratio, and decimal digit display.

SPEC Key & Stop Mode

Frequency Parameters (F2)

Preset Speed & Accel/Decel

Output Freq & Voltage

Protection Parameters (F4)

Motor Rated Current

Multi-function Parameters (F5)

Input Terminal X1 Settings

Input Terminal X2 Settings

Input Terminal X3 Settings

Output Terminal Y1 Settings

Fault Protection Display

Error Trip Display Details

Detailed descriptions and display codes for various error conditions like over current, overload, and voltage faults.

Protection List Overview

Comprehensive list of protection functions, their triggers, and associated trip displays and parameters.