Why Lea LE11132-40A3 Lawn Mower engine does not start?
If your Lea Lawn Mower engine won't start, there are several possible reasons. First, ensure that there is enough fuel in the fuel tank; if not, add fuel. Another reason could be a wet spark plug, in which case you should dry it. Also, check if the spark plug is damaged and replace it if necessary. Finally, make sure the spark plug connector is properly attached.
What to do if my Lea LE11132-40A3 Lawn Mower engine stops?
Your Lea Lawn Mower engine might stop due to a couple of reasons. First, check if the fuel tank has enough fuel and add fuel if needed. Second, the cutting device might be blocked, so remove any blockage to resolve the issue.
Why Lea LE11132-40A3 Lawn Mower has excessive vibration, noise or exhaust?
Excessive vibration, noise, or exhaust in your Lea Lawn Mower can be attributed to several factors. The cutting device may be dull or damaged, requiring replacement with a new one. Also, check if any bolts or nuts are loose and tighten them. Lastly, incorrect petrol or oil could be the cause; empty the unused petrol or oil and refill with the correct type.
How to improve the cutting result of my Lea Lawn Mower?
If you're getting unsatisfactory results with your Lea Lawn Mower, it could be due to a few reasons. The cutting device might be dull, so sharpen or replace it. Also, if the height of the grass exceeds the mower's capacity, only cut grass to the recommended height. Finally, check if the cutting height is set incorrectly and adjust it as needed.
General| Brand | Lea |
|---|---|
| Model | LE11132-40A3 |
| Category | Lawn Mower |
| Language | English |
To Next Page
