Do you have a question about the Leader Fox Kent and is the answer not in the manual?
Defines an electric bicycle and its legal classification as a regular bicycle.
Lists 10 factors affecting the range of an e-bike, including tyre resistance, weight, and temperature.
Details operating conditions, specifications like temperature, humidity, torque, weight, and noise for the M500 motor.
Lists critical safety guidelines for handling, charging, and using the e-bike battery.
Outlines essential safety measures for operating and handling the e-bike charger.
Provides guidelines for charging, maintaining the battery, and its recommended storage.
Specifies the warranty period and conditions for drive components and battery capacity.
Explains the charging process, indicators, and optimal charging conditions for Li-ion batteries.
Describes expected battery behavior, thermal protection, and capacity management.
Lists electrical specifications for the intelligent display, including voltage, current, and temperature ranges.
Details the physical construction of the LCD display, including materials and environmental resistance.
Explains the functions and indicators of the LCD display, including speed, assistance levels, and trip data.
Defines how maximal range is calculated based on battery charge, terrain, and riding conditions.
Provides instructions for assembling the display unit, emphasizing proper screw tightening.
Steps to safely turn on the e-bike's electrical system and display.
How to adjust the motor assistance level using the UP/DOWN buttons.
Instructions on how to activate and exit the e-bike's walking assistance mode.
Explains how to cycle through different display interfaces using the BOOST button.
Describes how the battery's remaining capacity is displayed and when charging is needed.
How to turn the display backlight and headlight on or off using the '+' button.
Details how to activate and use the BOOST mode for maximum power assistance.
Guide to entering the display setting interface and navigating options.
How to switch between metric (km) and imperial (mile) units on the display.
Configure the automatic power-off time for the e-bike system.
Adjust the display backlight brightness across five levels.
Switch the display to show output in Power or Current mode.
Adjust the sensitivity of the light sensor for automatic functions.
How to clear the single trip distance, average speed, and maximum speed data.
Enable or disable the haptic vibration feedback for buttons.
Information regarding the legally preset speed limit of 25 km/h.
Displays current battery status including percentage, voltage, and charge cycles.
How to switch between metric (km) and imperial (mile) units on the display.
Configure the automatic power-off time for the e-bike system.
Adjust the display backlight brightness across five levels.
Switch the display to show output in Power or Current mode.
Adjust the sensitivity of the light sensor for automatic functions.
Steps to troubleshoot when the control LCD display is not functioning.
Troubleshooting steps if the motor does not start when the walk assistance button is pressed.
Diagnostic steps for when the motor does not start while pedaling.
Table detailing error codes displayed on the LCD and their corresponding solutions.
Steps for submitting complaints regarding the electric set or battery.
Details on warranty coverage for electric bicycle components and battery life.
Conditions under which a warranty claim becomes invalid.
Provides warnings about e-bike usage, lending, age restrictions, and environmental conditions.
Critical warnings against submerging components, pressure washing, and tampering with connections.
Emphasizes using only manufacturer-approved chargers and components to avoid damage.
| Category | Scooter |
|---|---|
| Cooling System | Air-cooled |
| Fuel System | Carburetor |
| Front Suspension | Telescopic fork |
| Front Brake | Disc |
| Rear Brake | Drum |
| Width | 700 mm |
| Seat Height | 780 mm |
| Engine Type | Four-stroke, single-cylinder |
| Transmission | Automatic |