LeapFrog Interactive Learning Easel - Set-Up Guide; Loading the Storage Tray

19. Slide the Board Clip Release switch
to the right and while holding it, lift
the Board Clip.
20 . Position the Whiteboard/Blackboard
under the Board Clip. Release the
clip to secure the Whiteboard/
Blackboard in place. Repeat
these steps when switching from
whiteboard to blackboard.
SET-UP
1) After assembling the easel, place the Erasable Marker and
Chalk pieces in the left cups of the Storage Tray.
2) Place the 26 magnetic Letter Tiles in the center cup of
the Storage Tray.
3) Place the 6 magnetic Shape Tiles in the right cup of the
Storage Tray.
Now, let’s create and draw together!
13