Need help?Do you have a question about the LeapFrog LF80 and is the answer not in the manual?
Frequency Control| transmit frequency | 1881.792 - 1897.344 MHz |
|---|---|
| maximum power used by the transmitter | 0.25W (250mW) |
| channels | 10 |
Display| display size | 35 x 21.2 mm |
|---|---|
| display type | B&W LCD |
Power| battery voltage | 1.2V |
|---|---|
| battery capacity | 930/950mAh |
| power adapter output | 6V DC 400mA |
Steps to install batteries in the Parent Unit for operation.
Steps to install batteries in the Baby Unit for operation.
Instructions for connecting the Baby and Parent Units to power.
Guidance on charging the batteries and understanding battery status indicators.
Procedure to turn the Baby Unit and Parent Unit on and off.
Guidelines for optimal placement of the Baby and Parent Units for clear reception.
Instructions for responsible disposal of batteries and the product.
Statement of compliance with European regulations for radio equipment.
Recommendations for maintaining the product's performance and appearance.
To Next Page
