LeapFrog LF930HD - Status Check; Connection Status Indicator; Positioning the Baby Monitor; Optimal Placement and Interference Avoidance

3
4. Status Check
Once your Baby Unit and Parent Viewer are powered on and connected, your Parent Viewer
displays video from the Baby Unit, and the LINK LED light turns on.
1
5. Positioning the Baby Monitor
2
>
<
3ft (1m)
3ft (1m)
70
25.5° C
70
25.5°C
>
3ft (1m)
﹏﹏﹏﹏﹏﹏
﹏﹏﹏﹏﹏﹏
﹏﹏﹏﹏﹏﹏﹏﹏
﹏﹏﹏﹏﹏﹏﹏﹏
﹏﹏﹏﹏﹏﹏﹏﹏
﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏
﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏
﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏
﹏﹏﹏
﹏﹏﹏
﹏﹏﹏
﹏﹏﹏﹏
﹏﹏﹏
﹏﹏﹏﹏
﹏﹏﹏﹏
﹏﹏﹏﹏﹏
﹏﹏﹏﹏﹏
﹏﹏﹏﹏﹏
<
3ft (1m)
70
25.5° C
Note:
To avoid interference from other
electronic devices, place your baby
monitor at least 3 feet (1 meter)
away from devices such as wireless
routers, microwaves, cell phones and
computers.
Caution:
The default volume of your Parent Viewer
is level 3, and the maximum volume is
level 5. If you experience a screeching
noise from your baby monitor while
positioning:
- Make sure your Baby Unit and Parent
Viewer are more than 3 feet (1 meter)
apart, OR
- Lower the volume of your Parent
Viewer.
4
Tip: Want to mount Baby Unit on the wall?
Visit our Online Manual to find the wall
mounting tutorial video and step-by-step guide.
5