11
SETTINGS
In the Settings menu, change the following settings:
• Screen Brightness
Adjust the brightness of the LCD screen.
• Location
Select Northern or Southern Hemisphere.
• Photo Quality
Higher quality photos take up more
memory and lower quality photos take up less memory.
• Shutter Timer
Adjust the timer for taking a picture after pressing the Tick Button.
• Scene Recognition Mode
Change the lighting environment to better see what’s on the LCD
Screen in Telescope mode.
How To Copy Saved Photos From the Telescope to a
Computer
1. Insert a microSD card** into the microSD Card Slot of the unit.
2. In the Gallery, select the Photo Transfer icon to transfer all of
your saved photos from the unit’s internal memory to the inserted
microSD card.
3. After the photo transfer is completed***, take the microSD card
out of the unit and insert it into a computer.
4. The saved photos**** are located in the microSD card’s folder
#TELESCOPE/XX/YY. XX is a two-digit number from 01 to 16 that
will be assigned to the folder name. YY is another two-digit number
from 01 to 19 that will be assigned to the sub-folder name.
5. Copy the folder #TELESCOPE directly to the computer. DO NOT
cut and paste the files individually from this folder.
**The unit supports microSD cards up to 32GB (not included).
***During the photo transfer process, do not remove the microSD card or power off
the unit. Doing so may corrupt the transferring photo or cause the unit to freeze.
Corrupted photos will be displayed in the Gallery with an error icon .
****The saved photos will display a time and date that is not accurate, since the
device does not have an internal clock.
To Next Page
Loading...
