LeapFrog Magic Adventures Telescope - Photo Taking Tips; Troubleshooting Common Issues; Unit Stopped Working; Screen Not Working Correctly

14
TROUBLESHOOTING
Problem Possible Solution(s)
The unit stopped
working
(1) Press and hold the Power Button for more than 10
seconds.
(2) Release the Power Button and the unit will power
back on again. It should now work properly.
(3) If the unit does not work, change the batteries and
press the Power Button to turn on the unit.
Screen is not
working correctly
(1) Press and hold the Power Button for more than 10
seconds.
(2) Release the Power Button and the unit will power
back on again. It should now work properly.
PHOTO TAKING TIPS
1. When Taking Photos Indoors:
Since the telescope is designed to take outdoor photos, taking
photos of objects indoors will require sufficient light. Indoor
photos taken under regular lighting conditions may look darker
than expected.
2. When Taking Photos of the Night Sky:
This telescope cannot take photos of distant stars. It can only
clearly capture the larger moon in the night sky.
3. Setting a Timer:
When taking a photo of distant objects, slight shaking can
affect the quality of the captured image (such as wind or slight
vibrations generated when pressing the Tick Button). Aside from
using the Focus Dial to get a clearer photo, it is recommended to
set a timer before taking a photo to reduce the impact of shaking
on the captured image.
4. HowtoAchieve110xZoomMagnication:
The telescope is equipped with an optical lens with 24.5x optical
magnification (relative to a standard lens with 48 degrees
diagonal field of view). In addition, the Digital Zoom Button
features 4.5x digital magnification, which when combined with the
optical lens provides up to 110x magnification.