6
ASSEMBLY
With Scout’s Get Up & Go Walker
TM
safety comes first. To ensure
your child’s safety, adult assembly is required.
Use the Scout’s Get Up & Go Walker
TM
as a gym for infants. Use
as a floor toy (without legs) for sitting play or use as a walker
only when child is able to stand steadily. As with all toys for this
age group, adult supervision is recommended.
1. Attach the Walker Legs by inserting the Leg Screws into
the screw holes.
2. Adjust the desired angle of the Activity Panel, then tighten
each leg screw until you hear a “click”. The click signals when
the safety lock has been enabled.
a. Baby gym b. Activity panel
Note: For smaller babies, rotate
the panel so it’s flat so they can
reach all the manipulatives.
Note: When the legs are removed,
please keep the legs and leg
screws away from children.
To Next Page
Loading...
