LeapFrog Scout's Get Up & Go Walker - Disengaging and Re-engaging Safety Locks; Attaching Handle and Detachable Phone

7
c. Easel d. Walker
3. To loosen the screws, press and hold
the safety buttons on the bottom side
of the Activity Panel to disengage the
safety locks. Then turn the Leg Screws
counterclockwise. To fully disengage
the safety locks, you may need to
rotate the screw clockwise and then, after it disengages,
counterclockwise.
4. Attach the Handle by pressing it firmly
into the Activity Panel.
5. Insert the Detachable Phone into Scout’s
left paw. To prevent the Detachable
Phone from accidentally falling, do not
insert it when configured as a baby gym.
CAUTION:
ADULT ASSEMBLY REQUIRED
ATTENTION:
Ce jouet doit être assemblé par un adulte