5
GETTING STARTED
Battery Removal and Installation
1. Make sure the unit is turned Off.
2. Find the battery cover on the back
of the unit and use a screwdriver
to loosen the screw and open the
battery cover.
3. Remove the old batteries by pulling
up on one end of each battery.
4. Install 2 new AAA batteries
following the diagram inside the
battery box.
5. Replace the battery cover and
tighten the screw to secure.
609800 Manual.indd 5 2020/3/12 16:09:02
To Next Page
Loading...
Need help?
General