SET AUTO TIMER
1. Press and hold START and ENTER buttons
at the same time for 3 seconds.
2. Press buttons until SET AUTO
appears on the display.
3. Press ENTER.
4. Total Time: (Enter the total amount
of time. It will automatically split
between green, yellow and red
lights). Use buttons to scroll
through numbers and ENTER to
accept.
5. Sound?: Do you want a sound effect
at the start of the green light?
6. Yes/No: Use buttons to move
cursor and ENTER to accept.
7. If yes, use buttons to scroll
through sounds and ENTER to accept.
8. Repeat steps 7 and 8 for yellow and red sections.
9. Press MENU.
STARTING THE TIMER
1. After you set Manual and/or Auto time, press MENU
(the display will show CLOCK).
2. Use buttons to choose MANUAL TIMER or
AUTO TIMER and ENTER to accept.
3. Press the START button to start the timer.
6
SET
AUTO
TOTAL TIME
00:00:00
SOUND ?
YES/NO
To Next Page
Loading...