To Next PageTo Next Page
Need help?Do you have a question about the leco Profi-Grillpavillon XXL and is the answer not in the manual?
This product requires two people for assembly.
Verify product expectations and packaging integrity before starting assembly.
Attach base plates (22) to vertical posts (14, 15) using screws (28).
Join vertical posts (14, 15) to top beams (8, 12) with screws (31).
Connect horizontal supports (29, 30) to the upper frame structure.
Secure side braces (11) to the main frame using screws (30).
Attach shelves (7) to the side posts using screws (27, 11).
Connect lower back beams (10, 16, 17) to the frame with screws (29, 31).
Connect lower side beams (10, 17) to the frame.
Mount roof arches (4) to the top frame using parts (5, 23, 27).
Insert and secure roof support beams (13) using fasteners (33).
Slide roof panels (37) into the frame profiles (26).
Attach roof panels (37) to the frame using screws (27, 19, 21) and parts (2, 4, 5).
Secure roof panels (37) to the frame using screws (27, 19, 20) and parts (1, 3, 5).
Fasten roof apex components (4, 36) using screws (31, 32, 25).
Insert and secure remaining roof panels (37) using part (28) and fastener (32).
Firmly tighten all screws and perform regular checks.
Ensure roof panels are installed with the correct side (sticker 'Top side') facing upwards.
Fastening or anchoring the frame to the ground via screws or concrete is not permitted.
Check stability regularly, especially in winter. Remove snow load immediately.
General| Category | Outdoor Furnishing |
|---|---|
| Type | Grill Pavilion |
| Size | XXL |
| Roof Material | Polyester |
| Roof Waterproof | Yes |
| UV Protection | Yes |
| Assembly Required | Yes |
| Material | Polyester |
| Color | Anthracite |
