Lectric eBikes XP 3.0 - eBike Features and Operation

LECTRICEBIKES.COM | 602.715.0907 22
FEATURES
Motor
Never modify your frame or bicycle in any way as this could cause
serious injury or death. Do not sand, drill, le, or remove parts from
your bicycle. Do not install incompatible components or hardware.
To prevent serious injury or death:
• Do not open the drive unit yourself. The drive unit must only be
repaired by qualied personnel using only original parts. This will
ensure that the safety of the drive unit is maintained. Unauthorized
opening of the drive unit will render warranty claims null and void.
• All components tted to the drive unit and all other components
of your Lectric eBike PAS system (e.g. chainring, chainring
receptacle, pedals) must only be replaced with identical
components or components that have been specically approved
by Lectric eBikes. This should help protect the motor from
overloading.
• Always remove the battery pack from your Lectric eBike before
beginning work (e.g. inspection, repair, assembly, maintenance,
work on the chain, etc.), transporting it with a car or on an
airplane, or storing it. Battery pack removal should prevent
unintentional activation of your Lectric eBike.
• Do not make any modications to your Lectric eBike or attach
any other products that might increase the performance of your
Lectric eBike. Doing so will generally reduce the service life of the
system and risks damaging the drive unit and the bicycle. You also
run the risk of losing the guarantee and warranty claims on the
bicycle you have purchased.
By handling the system improperly you are also endangering your
WARNING!
WARNING!