LECTRICEBIKES.COM | 602.715.0907 32
P04
P06
P08
P09
P10
Setting
P01
P02
Sleep
Tire Size
Speed Limit
Throttle
Zero Start
Mode
Toggle
Function
Brightness
Distance
Units
10
22
32
0
2
Default
2
1
LCD Display sleep timer. The
default setting will turn the
display OFF after it has not been
used for 10 minutes.
Used to compute speed and
distance traveled.
0: Throttle active from standstill.
1: Throttle active only when
already moving.
16: Lectric “Passenger Mode”
32: Class 2
100: Class 3
0: PAS Active, Throttle Inactive
1: PAS Inactive, Throttle Active
2: Both PAS and Throttle Active
Explanation
Backlight display brightness.
The darkest level is 1 and the
brightest level is 3.
0: KM; 1: MILE.
P11 PAS
Sensitivity
3 When set to higher numbers, it
will take more crank rotations
for the motor to turn ON. Lower
numbers will take fewer crank
rotations to turn the motor ON.
To Next Page
Loading...
