Lectric XP Lite User Manual

LECTRICEBIKES.COM | 602.715.0907 48
E003
E006
E007
E009
E011
Hot
E008
E010
PAS Sensor Fault
Battery Undervoltage
Motor Fault
Controller Fault
Throttle Fault
Display
Communication
Reception Failure
Display
Communication
Send Failure
High Temperature
Fault
Check PAS quick plug
Fully charge battery
Check motor quick plug
Check controller connections
Check display quick plug
Stop use and allow bike
to cool
Check throttle quick plug
Check display quick plug
Error Code
Meaning
Most Common Solution
Error Codes
The components of your Lectric eBike are continuously monitored
automatically. If a fault is detected, the corresponding error code will
appear on the display.
You should have your bicycle maintained at regular service intervals
at your local bicycle shop.
To prevent serious injury or death:
• NEVER open any of the components, including the battery,
display, motor, or PAS sensor. Service should only be performed
by a bicycle repair shop.
• Always remove the battery pack before performing any bicycle
inspection, maintenance, or repair.
MAINTENANCE
WARNING!

Lectric XP Lite Specifications

General

Top Speed	20 mph
Weight	46 lbs
Max Load	275 lbs
Foldable	Yes
Charging Time	4-6 hours
Battery	Lithium-ion
Range	Up to 40 miles (depending on conditions)
Frame	Aluminum
Gears	Single-speed
Display	LCD