16LECTRICEBIKES.COM | 602.715.0907
Adjust Seat Height
WARNING!
• Always tighten fasteners
to the correct torque to
prevent serious injury
or death. Bolts that are
too tight can stretch and
deform. Bolts that are too
loose can move and fatigue.
Either condition can lead to
a sudden failure of the bolt
and result in a crash. See
Tightening Torque (p. 19).
Adjust Handlebar Height
WARNING!
• Always tighten fasteners to
the correct torque to prevent
serious injury or death. Bolts
that are too tight can stretch
and deform. Bolts that are too
loose can move and fatigue.
Either condition can lead to
a sudden failure of the bolt
and result in a crash. See
Tightening Torque (p. 19).
Select a height that is comfortable for you. DO NOT extend past
minimum insertion point. To adjust your handlebars, unlatch the
clamp. Move the handlebars to the desired height and close the
clamp. Re-tighten the stem clamp to the recommended torque. See
Tightening Torque (p. 19).
• Always insert the telescoping stem past the minimum insertion
point marked on the stem. A stem that is positioned too high can
damage the bike and can cause you to lose control and crash.
To Next Page
Loading...