LECTRICEBIKES.COM | 602.715.0907 30
To change display settings, hold the plus (+) and the minus (-)
buttons simultaneously to enter into the Settings Menu. Press the
button to toggle between each numbered setting. To adjust the
value of each setting, click the plus (+) and the minus (-) buttons as
needed.
There are 21 settings (P01-P21). You should only change the settings
listed on p. 31-32.
Settings Menu
WARNING!
WARNING!
Do not tamper with your bicycle. Tampering is dened as removing
or replacing any original equipment, or modifying your bicycle in
any way that may change its design and/or operation. Such changes
may seriously impair the handling, stability, and other aspects of the
bicycle, making it unsafe to ride. Tampering can void the warranty
and render your bicycle noncompliant with the applicable laws
and regulations. Lectric eBikes is not responsible for any direct,
incidental, or consequential damages, including, without limitation,
damages for personal injury, property damage, or economic losses
due to tampering.
To prevent serious injury or death, DO NOT change settings excluded
from the table. Changing a setting not listed in the following table
may cause your bike to stop working properly. If you need the
default setting values of settings not listed, contact Lectric eBikes.
DO NOT ride your bicycle until the default settings have been
restored.
To Next Page
Loading...