LECTRICEBIKES.COM | 602.715.0907 31
P04
P06
P08
P09
Sleep
Tire Size
Speed Limit
Throttle
Zero Start
10
23
32
0
LCD Display sleep timer. The
default setting will turn the
display OFF after it has not
been used for 10 minutes.
Used to compute speed and
distance traveled.
0: Throttle active from standstill.
1: Throttle active only when
already moving.
Range is 32-100. The value
represents the maximum
operating speed of your Lectric
eBike in km/h. For example,
a value of 32 indicates the
maximum speed will not
exceed 32 km/h. Drive speed
is maintained at this set value.
Any value above 45 will fully
unlock the bike’s speed, which
equates to up to 28mph.
Margin of error: 3 km/h
Setting Default ExplanationFunction
P01
P02
Brightness
Distance
Units
2
1
Backlight display brightness.
The darkest level is 1 and the
brightest level is 3.
0: Kilometers
1: Miles
To Next Page
Loading...