Led Lenser H14R.2 Instruction Card

LED LENSER®*
www.ledlenser.com/SLT
V1.0
Smart Instruction Card
H14.2 | H14R.2
The Energy Modes are the selectable “basic settings” of your flashlight. You can choose between Energy Saving
Mode, which optimizes burning life, and Constant Current Mode (constant current control) with electronically
controlled, continuous light output.
MULTI-FUNCTION SWITCH
Multi-function switch
Lumens (lm) Lumens (lm)
Energy Saving
Time (h)
Time (h)
Constant Current
7x
press
CHANGE OF ENERGY MODES
8th
hold down
1 sec.

Led Lenser H14R.2 Specifications

General

Beam Distance	300 meters
Water Resistance	IPX4
Modes	Power, Low Power, Boost
Focus System	Advanced Focus System
Max Lumens	1000 lm
Battery Type	Li-ion
Weight	340 g
Burn Time	up to 40 hours
Batteries	1x 18650 Li-ion
Run Time	Up to 10 hours (depending on mode)
Material	Aluminum