LEDGE SIGNATURE CHAISE User Manual

IMPORTANT NOTE
No tools required for assembly.
ASSEMBLY GUIDE FOR
SIGNATURE CHAISE
& CHAIR SHADE
STEP 1: Set one side frame piece down with holes
facing up.
STEP 2: Match holes of the frame piece with tabs of
the middle crossbars, inserting the 3 middle crossbar
pieces into the side frame piece, and apply pressure
to lock them together.
Nub
Groove
Step
STEP 3: Set the second frame piece on top, repeating
the process of inserting the tabs into the holes, and
apply pressure to lock them together.
STEP 4: Slip fabric on to the frame with the clear
media viewing window facing the inside of the curve,
or the bottom of the shade. Close velcro flap.
media viewing
window

LEDGE SIGNATURE CHAISE Specifications

General

Category	Patio Furniture
Type	Chaise Lounge
Material	Wicker/Rattan
Frame Material	Aluminum
Weight Capacity	250 lbs
Color	Brown
Assembly Required	Yes

Summary

Assembly Instructions

Important Assembly Note

Key information stating that no tools are required for the assembly process.

Step 1: Frame Preparation

Place one side frame piece down with holes facing upwards.

Step 2: Connecting Crossbars

Align tabs of middle crossbars with frame piece holes and lock them.

Step 3: Securing Second Frame Piece

Place second frame piece on top, align tabs with holes, and apply pressure to secure.

Step 4: Attaching the Shade Fabric

Slip fabric onto frame, ensuring correct window orientation, and close velcro flap.

Step 5: Mounting Shade to Seat

Slide the assembled frame onto the seat back; a gap is normal if secure.

Step 6: Final Assembly Check

Confirm all parts are secure and the product is ready for use.

Routine Cleaning Guide

Power Washing Instructions