Ledj Rapid QB1 - Operating Modes: Colour and Programs; Colour Mix Mode; Built-in Program Control

www.prolight.co.uk Rapid QB1 User Manual
9
Operating instructions
Colour mix mode:
Toaccessthecolourmixmode,pressthe“MENU”buttononthefrontoftheunittoshowCoLoonthe
LEDdisplay.Nowpressthe“ENTER”buttonandusethe“UP”and“DOWN”buttonstochooserEd.
Pressthe“ENTER”buttonandusethe“UP”and“DOWN”buttonstoselectthebrightnessofRed
between000~255.Value: 000 - 255 (000 = low, 255 = high). Nowpressthe“ENTER”buttonand
repeatforGrEEGreen,bLUEBlueandANbEAmber.
Pressthe“ENTER”buttontoconrmthesetting. 
Toexitoutofanyoftheaboveoptions,pressthe“MENU”button.
Built-in programs:
Toaccessthebuilt-inprograms,pressthe“MENU”buttononthefrontoftheunittoshowProGon
theLEDdisplay.Nowpressthe“ENTER”buttonandusethe“UP”and“DOWN”buttonstoselectoneof
the5built-inprograms(staticcolour,colourfade,auto,soundorstrobe).
StAt-Pressthe“ENTER”buttonandusethe“UP”and“DOWN”buttonstoselectbetween
Co01~Co25.Pressthe“ENTER”buttontoconrmthesetting.


FAdE-Pressthe“ENTER”buttonandusethe“UP”and“DOWN”buttonstoselectthefadeprogram
betweenFA01~FA05.Pressthe“ENTER”buttonandusethe“UP”and“DOWN”buttonstoselect
thefadespeedbetweenSP01~SP09.Pressthe“ENTER”buttontoconrmthesetting.
(01 = slow speed, 09 = fast speed).
AUto-Pressthe“ENTER”buttonandusethe“UP”and“DOWN”buttonstoselecttheautospeed
betweenSP01~SP09.Pressthe“ENTER”buttontoconrmthesetting.
(01 = slow speed, 09 = fast speed).
SoUn-Pressthe“ENTER”buttonandusethe“UP”and“DOWN”buttonstoselectthesound
sensitivitybetweenSE01~SE09.Pressthe“ENTER”buttontoconrmthesetting.
(01 = low sensitivity, 09 = high sensitivity).
Stro-Pressthe“ENTER”buttonandusethe“UP”and“DOWN”buttonstoselectthestrobespeed
betweenSt00~St10.Pressthe“ENTER”buttontoconrmthesetting.
(00 = strobe off, 09 = strobe fast).
Pleasenote:oncethestrobeissetthiswilltakeeffectinallbuilt-inprograms.
Toexitoutofanyoftheaboveoptions,pressthe“MENU”button.
Co01-Red
Co02-Green
Co03-Blue
Co04-Amber
Co05-Cyan
Co06-Magenta
Co07-Yellow
Co08-White
Co09-Orange
Co10-LimeGreen
Co11-Lavender
Co12-Yellow/Orange
Co13-Pink
Co14-LightBlue
Co15~Co25
-Whitecolour
temperaturemacros