To Next PageTo Next Page
Need help?Do you have a question about the LEEC Culture Safe Touch 190 and is the answer not in the manual?
General| Brand | LEEC |
|---|---|
| Model | Culture Safe Touch 190 |
| Category | Accessories |
| Language | English |
Explains safety and informational symbols used throughout the manual.
Provides crucial safety precautions for operation and maintenance.
Details the materials and build of the incubator's interior and exterior.
Describes the inner glass and outer doors, hinges, and locking mechanisms.
Explains the touch screen interface, PID loops, and data logging.
Details the infra-red sensor and its operational mechanism.
Provides visual representations of the incubator's outer and inner views.
Instructions for inspecting and removing the incubator from packaging.
Safety guidelines and weight information for moving the incubator.
Guidelines for placing the incubator and environmental requirements.
Details shelf placement, dimensions, and usable internal volume.
Instructions for filling, cleaning, and using the water tray for humidity.
Procedures for connecting the CO2 gas supply safely and correctly.
Initial steps for powering on and booting the incubator.
Procedure for configuring the incubator's internal clock.
Overview of default temperature and CO2 settings.
Explanation of the main interface screen and its elements.
How to adjust temperature settings and alarm thresholds.
How to adjust CO2 settings and alarm thresholds.
How to view and manage alarm conditions and indicators.
How to view temperature and CO2 data graphs.
Accessing various incubator settings and functions via the menu.
Configuration and management of the door open alarm.
Accessing a log of past events and alarms.
Setting up user accounts and passwords for access control.
Procedures for initiating and verifying data logging to the SD card.
How to create new log files with custom names.
Safe procedures for ejecting the SD card to prevent data corruption.
Steps to prepare the incubator before starting the sterilisation cycle.
How to initiate the high temperature sterilisation process.
Description of the heating and dwell phases of the sterilisation cycle.
Details the cooling process after sterilisation and CO2 restart.
Procedures for stopping the sterilisation cycle if necessary.
Describes the relay for connection to a building management system.
Details signal output for temperature and CO2 values.
Instructions for cleaning the exterior of the incubator.
Guidelines for cleaning the interior chamber and components.
Information on the two-year manufacturer's warranty and registration.
Recommendations for maintaining the incubator's performance over time.
Procedures and required information for returning the incubator for service.
Detailed specifications for temperature, CO2, electrical, dimensions, and weight.
Visuals showing the incubator's external dimensions and layout.
