LEFON SquareDevil 2.0/4.5 Page
3
of
13
Section 1：Operation Safety
SquareDevil 2.0/4.5 is samll, light and portable, be suitable to fuield work
requirements. Please use it properly based upon the procedure in this
manual. Using it for purpose other than those described in this manual may
cause injury to the user or to others. It may also cause damage to the
machine or other equipment.
¾ Always ensure the machine is in good working condition and comply with these
notes on safety.
¾ Keep complete documents nearby the machine.
¾ General valid regulations for the prevention of accidents must be observed.
¾ The machine can be only used for tube squaring.
¾ Damage caused by not following the manual is user’s responsibility.
¾ Only use the dimensions and material specifiedin these instructions. Consult
LEFON for cutting material that is not covered in the manual.
¾ Inspect the machine daily of visible sign of wear or damage. Repair any damage
or defect immediately
¾ Only qualified electrician can work on the electrical equipment.
¾ Unplug the power input before carrying out any maintenance or repair work on
the machine.
To Next Page
Loading...