Legendfires Vantage Manual Turbo

To Next Page

Vantage Manual Turbo

Coal, Pebble & Log Effect

Inset Decorative Gas Fires with Power Flue

Installation and

Users Instructions

These instructions should be read by the

installer before installation and then should be

handed to the end user when the installation

is complete.

This is an official requirement and is the

responsibility of the fitter of this

appliance.

Having installed the appliance, the installer

should take the necessary steps to ensure

that the user fully understands how to operate

the appliance and is also made aware of the

fire’s basic cleaning and maintenance

requirements.

Main Page

Need help?

Do you have a question about the Legendfires Vantage Manual Turbo and is the answer not in the manual?

Summary

Notes for the Installer and End User

Installation Requirements

Flue Terminal Positions

Specifies minimum dimensions for flue terminal positions to ensure safe operation.

Ventilation

Outlines necessary room ventilation for safe and effective appliance operation.

Spillage Test

Details the procedure for testing combustion product spillage for safety.

Installation Into Timber Framed Dwellings

Guidance for installers working with timber framed structures, focusing on safety.

Installation Using Extended Fire Surround or False Chimney Breast

Specific requirements for installations involving modified fireplace structures.

Installation Procedure

Installation of the Fire Box

Step-by-step guide for physically installing the main firebox unit.

Installing the Fan Unit

Instructions for correctly fitting and connecting the appliance's fan unit.

Alternative Fixing Method

Describes an alternative installation technique using a cable fixing kit.

Technical Data

Replacement Parts

Lists necessary replacement parts and their order references for maintenance.

Trouble Shooting (CORGI Engineer Only)

Control Panel Wiring Diagram

User Instructions

Operation and Controls

Guide to operating the fire, including lighting, settings, and shut-off procedures.

Cleaning and Maintenance

Fire Front Specifications

Provides dimensions for fire fronts and ash pan covers for selection.

Coal Layout Instructions

Pebble Layout Instructions

Log Layout Instructions

Guarantee

Trouble Shooting (User)

Provides solutions for common operational issues encountered by the user.