Leggero Max - Using Your Shopper

max
34
Using your Shopper
Chassis
The basic chassis or frame, comprising a combination of alu-
minium tubes and a number of different plastic parts, provides
an optimal platform for various application possibilities.
The bumper can be adjusted to the height of the user by a
push-in and pull-out action.
Box and cover
The box is to be considered an independent component with
impressive multifunctionality and simplicity. The cover can be
opened in two different positions. It can also be opened fully,
using the provided loop with fastening tape.
Support / Third leg
Swing-out
To pull out the support, briefly press your foot on the spring
plate.
Swing-in
Lift the shopping caddy slightly and gently swing the support
in. A perceptible click indicates that the support is correctly
engaged. Check that the third leg is firmly in place.
“Eccentric” safety element (E)
Fig A: 3rd leg unsecured, held.
•Fordailyuse,theeccentricisinthelowerend
position.
Fig B: 3rd leg secured, held.
•Foruseasabiketrailer(8),theeccentricissnapped
in vertically.
A
B
E
E