LEGI VARIO-S User Manual

Mögliche Toraufhängungen
4 Possible Gate Mountings for the VARIO-S -Wing LEGI Revolving GateOne
1
Internal
Internal
DIN right opening
DIN left opening
DIN left opening
DIN right opening
VP
Kehrstücke
Kehrstücke
The post and gate wing can
be mounted opening to the
right or left and outwards or
inwards. All gate wings have
a max. opening angle of
165 degrees. In the case of
outward opening, a turning
piece must be inserted for the
fence connecting post (ZAP).
Opening Directions
Mögliche Toraufhängungen
4 Gate Mountings for the VARIO-S -Wing LEGI Revolving GateTwo
Detail: Kehrstück (bei Bedarf)
Internal
External
40
30
(120)
100
50
Internal
External
Handle on right
Turning Piece
Internal
External
Handle on right
Handle on left Handle on left
Diagrams and Widths
Determining the Gate Widths: -WingTwo
(120)
100
40
30
(120)
30
40
100
Drive-through width “X” at 90° opening
Wing dimension -202 mm=
Drive-through width “X” at 165° opening
Wing dimension -90 mm=
“Y”
Gatepost intermediate dimension
= Wing dimension +70 mm
Handle on right
Internal
External
Determining the Gate Widths: -WingOne
(120)
100
40
19
(120)
100
40
40
Drive-through width “X” at 90° opening
Wing dimension -116 mm=
Drive-through width “X” at 165° opening
Wing dimension -60 mm=
Gatepost intermediate dimension
= Wing dimension +70 mm
“Y”
30
19
Handle on left
LEGI-Revolving Wing Gate VARIO-S
Assembly Instructions
patented
www.legi.de
We reserve the right to make structural modifications.
Turning Piece

LEGI VARIO-S Specifications

General

Brand	LEGI
Model	VARIO-S
Category	Fencing & Gates
Language	English

Summary

Diagrams and Widths

Opening Directions

Explains gate wing mounting angles (165 degrees) and use of turning piece for fence connecting post.

Determining the Gate Widths: One-Wing

Provides formulas for drive-through width and gatepost intermediate dimension for one-wing gates.

Determining the Gate Widths: Two-Wing

Provides formulas for drive-through width and gatepost intermediate dimension for two-wing gates.

Detail: Kehrstück (bei Bedarf)

Shows a detailed diagram with dimensions for the turning piece (Kehrstück).

Mounting Gate Wing on the Gatepost of the LEGI VARIO Gate with Grating Connection

Aligning the Gate Wings

Describes using resetting options on eye bolts and adjusting options for proper gate wing alignment.

Integrated Floor Bolts Operation and Assembly

Operation

Explains floor bolt movement using a tube and locking conditions when the tube is inserted.

Assembly: Before Installing the Gate Wing

Step-by-step instructions for inserting the floor bolt, operating tube, and securing with an expanding rivet.

Lock with Handle

Assembly: Before Adjusting the Gate

Instructions for inserting and loosely fixing the mortice cylinder lock, profile cylinder, rosettes, and gate handle.