Note: If you experience any issues with the lights not working and suspect an issue with a
component, please try a different port on the expansion board to verify where the fault lies (with
the light or expansion board). To correct any issues with expansion board ports, please view the
section addressing expansion board issues on our online troubleshooting guide.
36.) Neaten up the cables from the bottom four jets by folding and twistingthem around each
other into a neat bunch as shown below:
Use 2x Adhesive Squares to mount the 6-Port Expansion Board to back of the Tantive IV in the
following position, then tuck the bunched up cables inside the following space.
To Next Page
Loading...
