BEFORE YOU BEGIN 5
Before You Begin
Laying cables in between
and underneath bricks
Cables can fit in between and underneath
LEGO
®
bricks, plates, and tiles providing
they are laid correctly between the LEGO
®
studs. Do NOT forcefully join LEGO
®
together around cables; instead ensure
they are laying comfortably in between
each stud.
CAUTION: Forcing LEGO
®
to connect over
a cable can result in damaging the cable
and light.
Connecting Cable
Connectors To Expansion
Boards
Take extra care when inserting connectors
to ports of Expansion Boards. Connectors
can be inserted only one way. With the
expansion board facing up, look for the
soldered “=” symbol on the left side of the
port. The connector side with the wires
exposed should be facing toward the
soldered “=” symbol as you insert into the
port. If a plug won’t fit easily into a port
connector, do not force it.
Incorrectly inserting the connector can re-
sult in bent pins inside the port or possible
overheating of the expansion board when
connected.
LEGO
®
HAUNTED HOUSE 10273 LIGHT KIT INSTALL GUIDE
To Next Page
Loading...
