LEGO MINDSTORMS Education EV3 - Page 12

10
Getting Started with LEGO
®
MINDSTORMS
®
Education EV3 MicroPython
Version 2.0.0
Figure 2.4: Opening a previously created project.
2.3 Connecting to the EV3 Brick with Visual Studio Code
In order to be able to transfer your code to the EV3 Brick, you’ll first need to connect the EV3 Brick to your
computer using the mini USB cable and configure the connection with Visual Studio Code. To do so:
• Switch on the EV3 Brick.
• Connect the EV3 Brick to your computer using the mini USB cable.
• Configure the USB connection as shown in Figure 2.5.
File
Open a previously
created project
Open a recently
used project
1
2
LEGO, the LEGO logo and MINDSTORMS are trademarks of the LEGO Group.
©2019-2020 The LEGO Group.