LEGO Mindstorms NXT 2.0 - Sound Editor for NXT; Adding and Managing Sounds

₪ SOFTWARE
SOUND EDITOR
The Sound Editor allows you to add your own sounds to the NXT.
You can add sound files already stored on your computer*, royalty-free files found on websites, and even
record your own voice and download it to the NXT.
Calibrate Sensors
Undate NXT Firmware.
Create Pack and Go.
Black Import and Export Wizard,
Image Editar.
Remate Control.
You can find the Sound Editor in the NXT
software under ‘Tools’ in the menu bar.
Llick on it to open it.
You have the option to either import an
existing sound file or record your own
sound file.
To import a sound, click on 'Import" and
choose a file from the location [on your
computer) where you have stored your
sound files.
To record your own sound you first
need to have a microphone connected
to your computer.
Click on the ‘Record’ button and create
a sound into your microphone. You
can record up to 10 seconds of sounds
and edit the length of the recording
afterwards.
You can also trim [cut] the size of your
sound Ale by moving the small trian-
gles until the length is as you want it.
Save your personal sound files in the
NXT software's library. You can give it a
title that is easy for you to remember,
for example "Му first sound.’
The Sound Editor displays the maximum size (fle size limit] that you can download and store in your NXT's memory.
The sound file will appear in the list of sounds in the Sound Block.
Now you are ready to make your NXT robot say or play whatever sound you want it to!
"You can also download sound Ales from other sources, like the Internet. Do note that some files may require a license or royalty to be used.