LEGO Mindstorms NXT 2.0 - Remote Control of Robot; Direct Robot Control

₪ SOFTWARE
REMOTE CONTROL
The Remote Control gives you direct control over your robot!
3 С Calibrate Sensors
Update NXT Firmware..
Create Pack and Go...
Block impar and Export Wizard.
Image Editor.
Í
You can find the Remote Control in the
NXT software under ‘Tools’ in the menu
bar. Click on it to open it.
To take control of your robot you need
to have a connection between your PL
and your robot. If an active connection
already exists, the window will display
the name of the connected NXT. You can
change the active NXT without closing
the Remote control.
Press the arrow keys on your keyboard
or on screen with your mouse to drive
your robot in the direction of the
arrow. The spacebar will activate an
action motor on your robot to allow you
to move and react at the same time.
IF there is no active connection, the screen will say “No NXT Connected" and you will have to choose the
NXT you want to control.
You now have direct control and can take your robot for a spin!