LEGO Mindstorms NXT 8527 User Guide

፳ USEFUL INFORMATION
TROUBLESHOOTING
Resetting the NXT
If the running icon stops spinning, your NXT has frozen
and you will need to reset it. Follow these steps to reset your NXT:
Make sure that your NXT is turned on.
Push the reset button that is located on the back of
your NXT in the LEGO® Technic hole in the upper left
corner. Use, for example, an unfolded paperclip to
press the button.
If you press the reset button For more than 4 seconds
you will need to update the firmware [see below].
Updating the firmware in the NXT from your computer
Go to Tools > Update NXT Firmware.
ERE ጊያ” — Make sure that your NXT is turned on.
MINDSTORMS NXT un
[E] LEGO MINDSTORMS | Note! If you have just reset your NXT [see above]
File
Edit
89588
Help
the
display
will
not
show
anything.
A
ticking
sound
will fell whether it is turned on or not.
Make sure that your NXT and computer are connected
with the USB cable.
Go to the Tools pull-down menu in the software's
menu bar and select Update NXT Firmware.

LEGO Mindstorms NXT 8527 Specifications

General

Brand	LEGO
Model	Mindstorms NXT 8527
Category	Toy
Language	English