forcefully join LEGO® together around cables; instead ensure they are laying
comfortably in between each stud.
CAUTION: Forcing LEGO® to connect over a
cable can result in damaging the cable and light.
Connecting cable connectors to Strip Lights
Take extra care when inserting connectors to ports on the Strip Lights.
Connectors can be inserted only one way. With the Strip Light facing up,
ensure the side of the connector with the wires exposed is facing down. If a
plug won’t t easily into a port connector, don’t force it. Doing so will
damage the plug and the connector.
To Next Page
Loading...