LEGO Winter Toy Shop LED User Manual (English)

To Next Page

Light My Bricks : Winter Toy Shop LED

Lighting Kit

Here is the instructions document for the Lego Winter Toy Shop LED lighting

kit. Please read and follow the steps carefully to ensure this lighting kit is

installed properly.

. . .

Package contents:

• 3x White 30cm Bit Lights

• 3x Multi Colour Changing Light Strings

• 1x White Strip Light

• 1x 8-port Expansion Board

• 1x 15cm Connecting Cable

• 1x Battery Pack (3x AA Batteries Required) • 2x Adhesive squares for

mounting the expansion board

. . .

Important things to note:

Laying cables in between and underneath bricks

Cables can t in between and underneath LEGO® bricks, plates, and tiles

providing they are laid correctly between the LEGO® studs. Do NOT

Need help?

Do you have a question about the LEGO Winter Toy Shop LED and is the answer not in the manual?

LEGO Winter Toy Shop LED Specifications

General

Lists all components included in the LED lighting kit for the Winter Toy Shop.

Provides crucial advice on cable routing, connector insertion, and Bit Light orientation.

Step-by-step guide to installing bit lights into the street lamps and connecting them.

Instructions for installing a bit light into the front door lamp of the Toy Shop.

Details on connecting and mounting the LED strip light to the first floor under the clock.

Guide to installing multi-colour light strings on the left and right roof sections.

Instructions for mounting the expansion board inside the Toy Shop using adhesive squares.

Steps for threading and winding the light string around the Christmas tree.

Connecting the battery pack and powering on the completed lighting kit.