Need help?Do you have a question about the LEGRAND IME Conto D4-Pt and is the answer not in the manual?
General| Mounting Type | DIN Rail |
|---|---|
| Display Type | LCD |
| Frequency | 50/60 Hz |
| Current | 5A |
| Maximum Current | 6A |
| Accuracy Class | Class 1 |
| Communication | Modbus RTU |
| Protection Degree | IP20 |
| Voltage | 230/400V AC |
| Measurement | Energy, Voltage, Current, Frequency, Power Factor |
Covers hazards like electric shock, burns, and explosion.
Lists checks to prevent device damage from incorrect voltage or frequency.
Verifies package condition, product conformity, and documentation.
Lists device features, display, keypad, and MID label details.
Advises on avoiding electromagnetic interference during installation.
Specifies terminal types, wire sizes, and torque for connections.
Explains terminal markings and connection diagram types.
Provides wiring schematic for double tariff connections.
Illustrates Modbus wiring with a web server.
Explains how to navigate the device display and use function keys.
Shows active, reactive, and partial energy values.
Displays three-phase active, reactive, apparent powers, and power factor.
Details power demand display and the reset procedure.
Displays phase voltages, currents, and network frequency.
Shows phase shifts between voltages, currents, and voltage/current pairs.
Configures address, baud rate, parity, and response time.
Configures address, baud rate, and integration time.
Sets pulse output type, weight, length, and start counting.
Guides on changing editable parameters like address and password.
Explains how to change baud rate and address values.
Explains MODBUS protocol structure, addressing, and timing requirements.
Covers dimensions, connections, voltage, current, frequency, and accuracy classes.
Details specifications for digital inputs and pulse output.
Covers environmental conditions, EMC, low voltage, and RoHS compliance.
To Next Page
