LEGRAND Keystone RJ 45 - RJ45 Socket Connection; Supported Cable Connectors; Wiring Colour Codes; Supported Conductors

2/4
Cat. no(s).: 0 331 80
Keystone RJ45 socket cat.5e
Technical data sheet: F01421EN/00 Updated on : Created on: 20/09/2011
This system allows the wire pairs to be spread easily before attaching
them to the connector.
Spreading the wires ensures that pairs are separated by the required
13 mm.
Spreading the pairs at 90° in relation to the cable ensures the best
performance levels.
6. STANDARDS AND APPROVALS
Conforms to standards: ISO/IEC 11801 Edition 2
CENELEC EN 50173-1 2007
ANSI/EIA/TIA 568-B.2-1
IEC series 60603-7
5. USUAL CONNECTION OF RJ45 SOCKETS
Accepts the following cable connectors:
RJ11 (4 contacts), RJ12 (6 contacts), RJ45 (9 contacts).
Double colour code EIA - TIA 568 A and B on terminals:
- UTP 8 contacts
Conductors supported:
- Single-strand: 0.5 to 0.65 mm, AWG 22 to 25
- Multi-strand: AWG 26
- Polyethylene conductor insulation: max. Ø with insulation 1.58 mm
The RJ45 connectors are equipped with a rotating locking system that
does not require special tools and enables rewiring in the event of
error.
EIA 568 A
12345678
12345678
EIA
568
B







OK