To Next PageTo Next Page
Need help?Do you have a question about the LEGRAND MicroRex D21 and is the answer not in the manual?
General| Operating Voltage | 230 V AC |
|---|---|
| Frequency | 50/60 Hz |
| Switching Capacity | 16 A / 250 V AC |
| Shortest Switching Time | 1 minute |
| Number of Channels | 1 |
| Operating Temperature | -10°C to +50°C |
| Mounting | DIN rail |
| Number of Programs | 56 |
| Programming Resolution | 1 minute |
| Battery Backup | Yes |
| Degree of Protection | IP20 |
| Type | Digital |
| Contact Type | Changeover |
| Timing Accuracy | ± 1 s/day |
General safety instructions for installation, operation, and electrical compatibility of the device.
Explanation of menu selection and button operations for device control.
Procedure for setting the device to adjust for daylight saving time changes.
Defines a program as switch-on/off times and days, with OR logic linking channels.
Guide on selecting program activation/deactivation days, including ranges like 1-7, 1-5, 6-7, and ANY DAY.
Instructions for altering the on/off times for programmed events.
Instructions for changing the days on which programmed events are active.
Procedures for removing single programs or all programs within a specific channel.
Checks the order in which programs are executed as they were entered.
Confirms the chronological order of switching commands.
Allows manual switching of the output, bypassing programmed schedules.
Reverses the current program state, returning to programmed operation with the next command.
