LEGRAND Netatmo User Manual

Consejos y resolución de problemas
Consejos y resolución de problemas
¿Cómo funciona todo?
El módulo exterior (el pequeño) envía de forma inalámbrica sus medidas al módulo interior (el grande). El
módulo interior envía en Wi-Fi tanto sus propias medidas como las pertenecientes al módulo exterior a su
cuenta Netatmo personal en Internet.
Al iniciar la aplicación Netatmo en su iPhone, esas medidas se descargan de su cuenta personal y son
mostradas por la aplicación.
When configuring with an iPhone or iPad
When you configure your Netatmo Weather Station with an iPhone, the weather station is connected to the
wall adapter using its provided USB cable (USB to micro-USB) and the iPhone is connected to the weather
station using its own iPhone cable (lightning or 30-pin connector).
When configuring with a computer (Mac/Windows/Linux)
When you configure your Netatmo Weather Station with a computer, the weather station is not connected to
the wall adapter. The weather station is only connected to the computer using its provided USB cable (USB to
micro-USB). No additional cable is needed.
¿Cómo funciona todo?
¿Cómo funciona todo?
Configuration setup
Configuration setup

LEGRAND Netatmo Specifications

General

Indoor Module Power Supply	USB power adapter
Compatibility	iOS, Android
Indoor Temperature	0°C to 50°C
Outdoor Temperature	-40°C to 65°C
Indoor Humidity	0% to 100%
Outdoor Humidity	0% to 100%
Indoor Sound Meter	35 dB to 120 dB
CO2 Sensor	0 to 5000 ppm
Rainfall	0.2 mm/h to 150 mm/h
Mobile App	Netatmo Weather
Data Storage	Cloud storage
Indoor Module Dimensions	45x45x155 mm
Outdoor Module Dimensions	45x45x105 mm
Rain Gauge Dimensions	13x13x11 cm
Anemometer Dimensions	85x85x110 mm
Outdoor Module Power Supply	2 AAA batteries
Connectivity	Wi-Fi
Sensors	Temperature, Humidity, Sound, Rain, Wind
Wind Speed	0 to 160 km/h
Alerts	Customizable alerts
Power Source	Battery and USB power