To Next PageTo Next Page
Need help?Do you have a question about the LEGRAND Sanus SMF421-B1 and is the answer not in the manual?
General| Brand | LEGRAND |
|---|---|
| Model | Sanus SMF421-B1 |
| Category | Racks & Stands |
| Language | English |
Record your TV information and save for future reference.
Access video guides, use the HeightFinder tool, and contact live experts for help.
Avoid potential personal injuries and property damage by following these critical safety guidelines.
Ensure your TV weight does not exceed the mount's specified limit for safe installation.
Install on acceptable walls and gather necessary tools for installation.
View diagrams showing all product dimensions and measurements for installation.
Remove TV stand, protect screen, and install any necessary accessories prior to mounting.
Identify all supplied parts and hardware included in the kit.
Note that the concrete installation kit is not included and must be acquired separately.
Choose the correct screw diameter and length, with or without spacers, for your TV.
Attach the TV brackets to the back of your TV using the appropriate hardware.
Ensure proper stud location and drill pilot holes for secure wall plate mounting.
Secure the wall plate using lag bolts, ensuring they are tight but not over-tightened.
Drill into concrete and ensure anchors are seated flush, avoiding mortar joints.
Secure the wall plate using lag bolts and washers, tightening them appropriately.
Securely attach the TV to the arm assembly using the provided hardware and locking screw.
Attach the plastic caps to cover cables and provide a finished look.
Extend the arm to ensure slack, route cables through the arm, and reattach covers.
Adjust tilt tension and level using specific knobs and screws for optimal viewing.
Follow steps to safely remove the TV from the arm and the arm from the wall.
Contact SANUS via phone, email, or website for assistance and reviews.
Understand warranty coverage, limitations, and how state laws apply.
